Safe and Reliable
IP67 packs in an IP55 cabinet, aerosol fire suppression and multi-level electrical safety architecture.
Commercial & industrial
Core 261
Outdoor C and I BESS Cabinet
A fully-integrated 261 kWh outdoor BESS cabinet engineered for commercial and industrial sites — peak shaving, demand response, PV self-consumption and grid-tied microgrid duty. One IP55 enclosure, factory-tested, ready to energize.
Enquire about this system
Commercial and Industrial · Behind-the-meter
Engineering brief
Built for the application.
Flexible
Modular 1P52S packs scale from a single cabinet to multi-cabinet C and I microgrid clusters via parallel connection.
Highly Integrated
Battery, PCS, chiller, fire-safety and controls factory-commissioned in one cabinet — six subsystems acting as one.
Smart Maintenance
Self-developed EMS with real-time state monitoring and intelligent charge/discharge management.
Mission use cases
Where it works.
Peak Shaving · Demand Response
Reduce grid demand during peak periods and dispatch stored energy in response to site or grid needs.
PV Self-Consumption
Time-shift solar production for onsite self-consumption and grid-tied microgrid operation.
Military Edition
CADPAT-pattern ruggedised enclosure (Desert · Woodland · Urban) for forward deployments, tactical microgrids and field command.
Technical data
Full specifications.
System
- Nominal voltage
- 380 – 480 VAC, 3-phase
- Frequency
- 50 / 60 Hz
- System configuration
- 1P260S
- Rated power
- 125 kW
- Nominal energy
- 261 kWh
- Acoustic noise
- ≤ 50 dB
Cell and Stack
- Cell chemistry
- LFP prismatic · 314 Ah · 1,004.8 Wh
- Pack configuration
- 1P52S · 166.4 VDC · 52.2 kWh
- Packs per cabinet
- 5
- Pack weight
- ≈ 340 kg
Environment and Enclosure
- Ambient temperature
- −30 °C to +50 °C (>45 °C derating)
- Humidity
- ≤ 95 % (no condensation)
- Altitude
- ≤ 3,000 m (>2,000 m derating)
- Protection degree
- IP55 (cabinet) · IP67 (pack)
- Cooling method
- PCS air + battery liquid
- Fire suppression
- Aerosol · smoke/heat/Li-ion detectors
Mechanical
- Form factor
- Outdoor cabinet, integrated
- Dimensions (L×W×H)
- 1,120 × 1,350 × 2,420 mm
- Weight
- 2,600 kg
- Footprint
- ≈ 1.51 m² (≈ 16.3 ft²)
Communications
- Comms interface
- RS485 / Ethernet (reserved)
- Protocol
- Modbus / MQTT (customisable)
- BMS · PCS · Chiller · EMS
- 1 set each
Published specifications from Ardenox. Confirm final configuration, performance, certification and suitability for local requirements with our team before project design.